Greenthumbskunk
PICK YOUR OWN
How do you have that wired up
#Heisenbeans Genetics
- Thread starter Heisen
- Start date
How do you have that wired up
Greenthumbskunk
PICK YOUR OWN
I made my own by running 3/4 line that T's off into 1/2 line. I then use a hole punch and put in a barbed fitting in the tube. A 1/4 line runs from it and a 2 GPh dripper. In my one gal pots I use 1 dripper. 3 gal and up 2 or more depending on gal size.
You can also buy a manifold like this
Amazon.com : Rain Bird XBD-80 Xeri 8-Outlet 1/4-Inch Drip Manifold : Automatic Lawn Drip Irrigation Kits : Garden & Outdoor
Amazon.com : Rain Bird XBD-80 Xeri 8-Outlet 1/4-Inch Drip Manifold : Automatic Lawn Drip Irrigation Kits : Garden & Outdoor
www.amazon.com
And plumb in the rest if you wanted a shut off valve.
Their are kits as well.
I bought a lotnof my stuff from the drip depot. Think that's the name. I also use several of these pumps. Not only for the drip irrigation but also hand watering. Pretty powerful pump.
Nobighurry
PICK YOUR OWN
Kulla380
Really Active Member
I'll draw you a schematic later today
TerpyTyrone
LED Recruiter
12 sticky icky, 6 lemon frosting and 12 wc x dosi in the drink!
The gg4 cross seems to be very small seeds. 2 packages, so it's no fluke.
Maybe the gg4 just produces small seeds
Kulla380
Really Active Member
Greenthumbskunk
PICK YOUR OWN
Don't mock my drawing skills. It's late here
What do you use for multiple 240 volt loads. Just make a box that has several 240 volt plugs and have it wired into the contactor?
Slowdrawl
PICK YOUR OWN
Years ago I used to maintain the sports field lights for a municipality and have had a fair amount of experience with contactors, timers and such.
That would probably be the easiest way for you to set it up. As long as your breaker, conductor size and contactor are rated for your load.
TerpyTyrone
LED Recruiter
Sure, just dont overkill your " box" , trough, junction box.
Know how many amps ur load is, wire and contactors rated accordingly.
The contractors probably share neural and hot.
Greenthumbskunk
PICK YOUR OWN
I'm pretty familiar with wiring boxes and configuring loads on a breaker vs wire size.
This is wiring up 4 inverters that is euro style. That is 1 leg of 240v instead of 2 legs of 120v
Greenthumbskunk
PICK YOUR OWN
You guys wanna see more problems of growing? Lol
Ok since it has been cool and rainy for days on end in a greenhouse it is not good.
I have a bunch of Autos out their in smart pots growing in coco.
You get this when sun rarely comes out. I tried something new today in spraying it with a mix of hydrogen peroxide and water. It is usually a death knell to a plant when you see this. I have it on several plants.
Ok since it has been cool and rainy for days on end in a greenhouse it is not good.
I have a bunch of Autos out their in smart pots growing in coco.
You get this when sun rarely comes out. I tried something new today in spraying it with a mix of hydrogen peroxide and water. It is usually a death knell to a plant when you see this. I have it on several plants.
Slowdrawl
PICK YOUR OWN
I didn't go into detail, figured you had some electrical saavy. Nice, clean work ya got there.
Slowdrawl
PICK YOUR OWN
Looks like botrytis, hard to control. I used to get it in October trying to finish up my plants in my hoop houses.
I would spray it with alcohol to slow it down on the stems. Once it's in the buds your fucked.
Promedz
Zeus
Omg @Greenthumbskunk sry for all that to hit at one time bro! Hope things turn around for you!
Slowdrawl
PICK YOUR OWN
There's some POTM contestants.
Greenthumbskunk
PICK YOUR OWN
Yep I've gotten it usually in the fall when rain sets in or very high humidity and cool nights. At nights here humidity is well over 90%
Greenthumbskunk
PICK YOUR OWN
I hope so too. Seems everytime I get into flower on anything something messed up happens.
This time of year its usually in the mid 80s here not in the 50s -60s and cloudy.
No rain today and tomorrow but rain starting in again saturday and every day for the foreseeable forecast