Anyone recognize this LED
- Thread starter Turpman
- Start date
Glossybudz
Super Active Member
how many do you reckon for a good set up
Turpman
PICK YOUR OWN
I'm thinking $600 Can. I'm guessing these are well over a grand per light and by the look of them they are new. All were/are in bubble wrap. No dust on top heat sinks.
1x Hlg 600 48B with 100k dimmer. Just have to wire a 110-220plug or I can for cost if needed.
4x150w lights 600LED/strip with heat sink, lense and all wiring to plug and play. These were set up in a huge room so some sets will have a long main 48v wire that splits into 4 to each group. Can be cut/shortened and reattached to the 3way splitter that is included.
I also have 10 spot wall mounts for the drivers. I'd throw them in if someone wants to go big. They are a metal powder coated frame with 10 maybe 12 spots to mount the drivers to. With wiring junction box for 220 power. Fucken heavy with drivers mounted. Too heavy to lift with one person heavy.
Any Albertans delivery/ meetup could be possible.
Shipping possible but they do have some weight to them so it's not going to be cheep.
I'll post some better picks up of what stuff is included.
1x Hlg 600 48B with 100k dimmer. Just have to wire a 110-220plug or I can for cost if needed.
4x150w lights 600LED/strip with heat sink, lense and all wiring to plug and play. These were set up in a huge room so some sets will have a long main 48v wire that splits into 4 to each group. Can be cut/shortened and reattached to the 3way splitter that is included.
I also have 10 spot wall mounts for the drivers. I'd throw them in if someone wants to go big. They are a metal powder coated frame with 10 maybe 12 spots to mount the drivers to. With wiring junction box for 220 power. Fucken heavy with drivers mounted. Too heavy to lift with one person heavy.
Any Albertans delivery/ meetup could be possible.
Shipping possible but they do have some weight to them so it's not going to be cheep.
I'll post some better picks up of what stuff is included.
Turpman
PICK YOUR OWN
Few photos.
Bare strip.
Nice aluminium backing for heat transfer. EB strips are Fiberglas, not as good.
End profile. Some nice cooling fins.
Not sure what you call the connectors but the plug and twist lock.
I did some destructive testing when I first tested.
Like a kid I knew better. I had 2 lights hooked up to a 600 watt driver and gave the DIM pot a quick twist to blind my self and a herd a little snap. Didn’t think any thing of it but one LED unsoldered itself and moved a bit. Left one row (5LED open).
Of course I had to see if I could fix it. Ordered a hot air soldering gun and gave it a go.The glass didn't want to come off but I was able to brake the bond to heat sink and remove the strip.
The air gun wasn’t quite hot enough as I was heating from the back side. And the back is aluminium. Best backing for heat transfer. Air and a pen soldering iron I got the LED to move back to its spot and low and behold the row works again. Now I have to figure how to epoxy it back in.
Thought I would update with some picks. I'll get more soon.
Bare strip.
Nice aluminium backing for heat transfer. EB strips are Fiberglas, not as good.
End profile. Some nice cooling fins.
Not sure what you call the connectors but the plug and twist lock.
I did some destructive testing when I first tested.
Like a kid I knew better. I had 2 lights hooked up to a 600 watt driver and gave the DIM pot a quick twist to blind my self and a herd a little snap. Didn’t think any thing of it but one LED unsoldered itself and moved a bit. Left one row (5LED open).
Of course I had to see if I could fix it. Ordered a hot air soldering gun and gave it a go.The glass didn't want to come off but I was able to brake the bond to heat sink and remove the strip.
The air gun wasn’t quite hot enough as I was heating from the back side. And the back is aluminium. Best backing for heat transfer. Air and a pen soldering iron I got the LED to move back to its spot and low and behold the row works again. Now I have to figure how to epoxy it back in.
Thought I would update with some picks. I'll get more soon.
Last edited:
Yea if you get it in place and had a strong straight edge, steel rod maybe, you might could place some shims or a shim every so often , press then move the shim a tad, press, till you get it wormed out.
brightlights
New Member
Turpman!
ready to unload some lights??
ready to unload some lights??
sfrigon1
Seed Aficionado
Yeah , what's the hold up here lol. I'm down .they look tits
brightlights
New Member
please don't make fun of me, I actually can't figure out how lol. can you pm me??
i think that might be the issue.brightlights
New Member
oh man, ok here we go lol. I will start posting away!! lol hopefully it doesn't take too long!
How it been going with the lights?