For the stock solution users of MC. How would I go about making a stock solution of MC for a 17 gal res? Is it as simple as dissolving as much MC as I can in a certain amount of water?
R/O or distilled I presume. I use 68gs of MC.My ppm comes out to 820-850ish 220ish ppm is my tap.600ish ppm of MC from the rooter to the tooter (seedling-chop).
Shit,I might not have enough left to make a stock solution. Ummm...asking for a friend heh.
Thats a trick question because the mega will not dissolve all the way in your stock solution. You will have to shake it up and have the particles that settled on the bottom stirred up floating around while you pour. And even then your still going to have most of the particles not flow through but immediately settle and float down.
A simple way to do what you want is just multiply by 10. 680 grams in your stock should do 170 gal.
I would use distilled water if i was you.
When i buy nutes and they are usually always dry i always make concentrated stock in 5 gal containers. If it somethibg small like a lb i put it in an old jug and write on the tape what it is and the dilution rate.
How you find the dilution rate is take exactly 5 gal of water or 1 gal whatever you feed with and measure out in ML how much it raises the ppm.
For example 1 gal out of your tap is 200. 10 ml of your concentrate brings it up to 450.
Now you know that 10 ml adds 250 ppm.
So if you want to bump it by 500 ppm you add 20 ml per gal of water. Or if you are like me and have to add cal mag i put in the cal mag and then add 15 ml of solution.
You can adjust it anyway you want if adding cal mag/ bloom booster etc.
Ususlly it will come out to something odd like 18 ml per gal. When just dumping a half a bag into a 5 gal container.
Also you will notice after some time the mega will have slime growing in your concentrate. It is the only dry i have mixed that has ever done this.