QB132 V2 Quantum Boards × 1 V2 3000K

[TerpyTyrone]

No heat sinks required.
To my door for 147$
SPECIFICATIONS

• 4 piece QB 132 LED Boards
• 132pcs Samsung LM301B LED per board
• 1 Molex Connectors, Push-Button Type
• Dimensions 300mm x 225mm
• 36V DC. Max current 2100mA

 

[TerpyTyrone]

HLG-240H-C1750
LED DRVR Module 1-CH IP65 143V 1.75A (Alt: HLG-240H-C1750A

 

[gwheels]

How much will it end up costing you for how many watts?

 

[TerpyTyrone]

300w for 210 w/ driver.
Whyte recommends 600w for a 4x4 so this will be half what I need.
Maybe do a diff spectrum lime 3500k next time.
Just goimg to self tap these to a gutted 2x4 t12 fixture I got for free

 

[gwheels]

That is a pretty good deal. 420 for 600 watts is not to shabby. Make it on 4 20 and you will grow monsters...i read it in a fortune cookie.

 

[TerpyTyrone]

Simple and least time consuming and of course price point

 

[TerpyTyrone]

Ive been looking for a while. Was looking toward strips but then the heat sinks and frame shiiittt

 

[WebstersBallSack]

I pulled 2 pound a few times from half my 4x8 under 560w , 600w will rock your space good.

 

[gwheels]

I will try and build one the next time i decide to light up more.

 

[TerpyTyrone]

I pulled 2 pound a few times from half my 4x8 under 560w , 600w will rock your space good.

That really helps ease my anxiety. That its not a good enough start.
With my hps dimmed to 50% + these leds and I should be all set for a month or so until the weather warms.
Then it'll be time to,lose the hps and get another set or add AC.

 

[badmofo529]

Same thing I just got done building. When you factor in extra aluminum for a strip build, these are a great deal, and way less work.

 

[Turpman]

Bridge EB don’t need cooling if run at .7A I have mine mounted to tin angle bracket for suspended ceiling and they run 35c at .8A
Is that a China board? What diodes are in it?

 

[Erick31876]

No heat sinks required.
To my door for 147$
SPECIFICATIONS

• 4 piece QB 132 LED Boards
• 132pcs Samsung LM301B LED per board
• 1 Molex Connectors, Push-Button Type
• Dimensions 300mm x 225mm
• 36V DC. Max current 2100mA

Is that from hlg? Or a different company? I'm looking to get another led light, but can't decide on cobs, or boards.do you have a link

 

[TerpyTyrone]

Is that from hlg? Or a different company? I'm looking to get another led light, but can't decide on cobs, or boards.do you have a link

Horticulturelightinggroup.com

 

[TerpyTyrone]

Bridge EB don’t need cooling if run at .7A I have mine mounted to tin angle bracket for suspended ceiling and they run 35c at .8A
Is that a China board? What diodes are in it?

No they are samsung 301b diodes

 

[TerpyTyrone]

So ne potentiometer on this model, some advice has been to tape off the unused leads. Would that be advised?

 

[Turpman]

Yes but why not?

 

[TerpyTyrone]

Yes but why not?

Do u know or? I dont wanna get my new boards coming. I have the potentiometers coming just in case. But i dint see why not run it wide open. Yeehawww

 

[TerpyTyrone]

And flip..... Up potted too

 

[Erick31876]

Are they hard to wire up? I'm pretty new to led lights and am looking to get another one.